Accessories and Consumable Materials

Service Kit for HF Spindles

Service kit for the cleaning and greasing of the spindle. We recommend to clean the collet chuck within the spindle at least once a week according to the instructions of the manual.

Shadow frame
Tool Change Station

Accessories for the automatic tool change. The tool change stations can be supplied in different tool diameter sizes.

Shadow frame
Limit Stop Rings and Insertion Tool

The limit stop rings are used to fasten the tool shafts in the automatic tool change. To push the rings on the 6 mm and 8 mm shanks we recommend the DATRON insertion tool.

Shadow frame
VacuCard

This paperboard serves as the "sacrificial layer" during vacuum clamping. This special fabric structure distributes the vacuum homogeneously and ensures a uniform suction force over the entire clamping surface.

  • distributes vacuum homogeneously
  • uniform suction force
  • format matches the DATRON vacuum plates
Shadow frame
VacuCard++

The patented VacuCard++ is based on the standard VacuCard and has a grid-like adhesive structure. Thanks to this special adhesive layer, the VacuCard++ has a considerably higher combined clamping force and fixes even small, light parts with high process reliability.

  • grid-like adhesive layer
  • delicate parts are firmly clamped
  • homogeneous vacuum distribution
  • format matches the DATRON vacuum plates
Shadow frame
Spraying Nozzles and Securing Brackets
Shadow frame
Slide Nuts and Centering Sleeves
Shadow frame
ProCut 56

When machining workpieces made of aluminum and plastic playing 56 ProCut its strengths - especially in connection with the chip suction system DATRON CleanCut. The lubricant provides a burr-free machining of the workpieces. In addition, it prevents the emergence of material deposition (built-up edge) on the tool. When vacuuming no explosion protection is required. ProCut 56 is almost completely volatile and leaves very little residue on the workpiece.

Shadow frame
ProCut 56-2

ProCut 56-2 serves as an ethanol substitute and is ideal for handling the plexiglass. Thus, this provides lubricant to MM - especially for companies or divisions, where the use of ethanol is not permitted, and for working materials, which tend to swell when in contact with ethanol.

Shadow frame
ProCut 200

Especially for steel processing, the lubricant ProCut 200 was developed. Also the cleaning of machined parts can be omitted in most cases.

Shadow frame