DATRON CNC Milling Tools
DATRON Ball Nose/External Radius End Mills
Especially designed for 3D machining, DATRON’s ball nose end mills are offered in several versions. In addition to one, two and four flute versions, exclusive polished variants as well as micro-versions are available, exclusive from DATRON.
- Micrograin solid carbide end mill
- with single flute and radius bottom
- 30° upcut spiral
- shank without clamping surface DIN 6535-HA
With this specially ground milling tool, with a small flute and ball nose end very outstanding results can be performed with high feed rates in the material. The large chip groove allows for optimal chip removal and an excellent surface finish.
- Micrograin solid carbide end mill
- with single flute and radius bottom
- 30° upcut spiral
- shank without clamping surface DIN 6535-HA
- with polished cutting edge
Specially designed for 3D machining of transparent plastics. The extremely sharp cutting geometry with a polishing cut ensures highest-quality surface results, the cutting construction allows still higher material feed rates, which significantly shortens production times.
- Micrograin solid carbide end mill
- with two flutes
- 30° upcut spiral
- centre cut
- shank without clamping surface DIN 6535-HA
- Micrograin solid carbide end mill
- with four flutes
- 30° upcut spiral
- centre cut, full radius
- shank with clamping surface DIN 6535-HB
- with Alcrona coating
- Micrograin solid carbide end mill
- with four flutes
- 30° upcut spiral
- centre cut, full radius
- shank with clamping surface DIN 6535-HB
- with Alcrona Coating
- Micrograin solid carbide end mill
- with two flutes
- 30° upcut spiral
- centre cut
- toric cut
- shank without clamping surface DIN 6535-HA
Thanks to the toric cut of the shaft the work piece can be machined more deeply.
- Micrograin solid carbide end mill
- with two flutes
- 30° upcut spiral
- centre cut
- toric cut
- shank without clamping surface DIN 6535-HA
Thanks to the toric cut of the shaft the work piece can be machined more deeply.
- Micrograin solid carbide external radius end mill
- with two flutes or up to four flutes
- with specially cut edges for the machining of external edges
- shank without clamping surface DIN 6535-HA
This end mill is specially designed for the optimum machining of external radii.
- Micrograin solid carbide external radius end mill
- with three flutes
- with specially cut edges for the machining of external edges
- shank without clamping surface DIN 6535-HA
- with polished cutting edge
The external radius end mill especially developed for acrylic has an extremely sharp cutting geometry with a polishing cut and is therefore ideally suited for creating transparent edge roundings.
- Micrograin solid carbide external radius end mill
- with two flutes
- with specially cut edges for the machining of external edges
- shank without clamping surface DIN 6535-HA
These outer radius end mills were specifically designed for the automated deburring of counter plate grooves. The tools have a uniform outer radius of 0.3 mm. With face diameters between 0.9 and 2.4 mm all standard counter plate groove widths are covered. The flute geometry optimised for steel machining guarantees excellent cutting results with excellent durability.
