Dental CAD/CAM

Dental CAD/CAM

We Understand Dental

Besides being experts in machine construction, at DATRON we are also experts in the dental field:
Our in-house team of dental technicians and dental engineers exclusively focuses on that particular technology sector. With many years of CAD/CAM expertise under our belt and a vast technical know-how of the dental industry, we have designed our DATRON D5 series to cater to the particular requirements of dental laboratories.

We anticipate technological trends and implement their individual aspects into our own validated CAD/CAM process at DATRON's in-house Technology Centre.

This way, our customers  can apply the technologies of the future already today.

DATRON

D5 Linear Scales

More than accurate

Especially suited to machine implant-supported work in grade 5 titanium, the D5 Linear Scales (equipped with linear scales) offers maximum process reliability and meets the highest demands concerning precision, e.g. for large-span work. With an accuracy of ± 5 μm, this machine is ideally suited for milling centres with highly demanding customers.

DATRON

Dental milling tools

more information about our dental milling tools here

  • Low effort and valuable time savings due to ringed DATRON tools.
  • Maximum tool life thanks to optimized coatings of the milling tools for the materials to be machined
DATRON
  • Low effort and valuable time savings due to ringed DATRON tools.
  • Maximum tool life thanks to optimized coatings of the milling tools for the materials to be machined
compatible with
  • High precision when machining CoCr and titanium
  • Long tool life, oxidation resistance and thermal stability thanks to X.CEED coating
  • Four-edged milling cutters especially for machining preforms
comptible with
  • Low effort and valuable time savings due to ringed DATRON tools.
  • Maximum tool life thanks to optimized coatings of the milling tools for the materials to be machined
compatible with
  • Long tool life and excellent price-performance ratio thanks to DLC coating
  • High precision when machining zirconia, PMMA, wax and peek
compatible with
  • Low effort and valuable time savings due to ringed DATRON tools.
  • Maximum tool life thanks to optimized coatings of the milling tools for the materials to be machined
compatible with
  • Long tool life thanks to diamond coating
  • Excellent price-performance ratio and high precision for machining zirconia
compatible with
  • Long tool life and excellent price-performance ratio
  • Sharp cutting edges and highest cutting quality when machining zirconia thanks to thin and smooth DLC coating
  • High precision when machining zirconia, PMMA and wax
compatible with
  • Long tool life, oxidation resistance and thermal stability thanks to X.CEED coating
  • High precision when machining CoCr and titanium
compatible with
  • Low effort and valuable time savings due to ringed DATRON tools.
  • Maximum tool life thanks to optimized coatings of the milling tools for the materials to be machined
compatible with
  • High precision when machining zirconia, PMMA and wax
  • Long tool life and excellent price-performance ratio thanks to DLC coating
  • Sharp cutting edges and best cutting quality thanks to thin and smooth DLC coating

Which indication do you want to mill?

One for all!

The DATRON D5 series facilitates the machining of all common dental materials* (such as zirconium oxide, cobalt chrome, titanium, glass ceramics, PMMA, PEEK, gypsum, etc.).

DATRON 5-axis simultaneous machining and high precision enable the use for a wide range of applications.

* Specific features depend on selected machine configurations and specific CAD and CAM software used.

Suitable for many common implant systems

Made of zirconium oxide, cobalt-chromium, titanium or composite materials

Milling of anatomical models and precise stumps

Individual Abutments

Suitable for many common implant systems

Abutment milling with our DATRON D5 technology is easily done, whether adhesive, preformed or complete-with-interface.

Your benefits:

  • High surface quality
  • High precision
  • With rotation protection
  • With adjusted emergence profile
  • Use of standard screws

The manufacturing of individual state-of-the-art abutments requires reliable high-precision milling technology. DATRON not only provides the neccesary technical know-how but also future-oriented dental process and material related expertise.

* Suitable for many common implant systems

Screw-retained Superstructures

All span widths*

DATRON Dental milling technology enables the making of screw-retained super-structures featuring:

  • Round and parallel bars, individual bars, multi-unit bridges
  • With implant connection
  • Wide-spanning bar structures at mucosal level, screwable directly onto the implant
  • Free built attachments and locators (depending on the CAD software used)

 Your benefits:

  • Tension-free fit
  • Highest precision
  • Surfaces ready for polishing
  • Direct screwing compatible with many common implant systems

DATRON offers all components for the CAD/CAM process from a single source, from high-precision scanners (e.g. Imetric) to CAD and CAM software (e.g. WorkNC Implant Module or hyperDENT Abutment Creator).

*Depending on the material used and available blank thicknesses

Anatomically reduced multiunit bridge

Telescopic and Conical Crowns, Attachments

Made of zirconium oxide, cobalt-chromium, titanium or composite materials

DATRON provides you with the freedom of high-tech advancements in using leading dental expertise  to produce individual telescopic and concial crowns and attachments:

  • Freely designable
  • Individual insertion direction
  • High surface quality in both primary and secondary components
  • Adjustable friction (over CAD software)
  • Freely designable attachments and locators (depending on CAD software used) 

DATRON technology is the perfect answer to your requirements when producing telescopic and conical crowns and attachments. 

Primary and secundary telescope

Models

Milling of anatomical models and precise stumps

The making of dental models is a highly demanding task. DATRON dental technology is engineered and continuously improved to meet those requirements:

  • Jaw models
  • Precise, individually removable stumps
  • Milling with or without articulator
  • Short machining times

DATRON model materials (polyurethane or plastic-bonded gypsum) have the following outstanding properties:

  • High surface quality
  • Edge stability
  • Dimensional accuracy
  • Humidity stability

TIP: Due to their low material costs, DATRON polyurethane blanks are also excellent for classic crown or bridge technology test milling.

Occlusal Splints

Machining occlusal splints demands highest precision and dental expertise. With DATRON CAM technology your benefits when working with crystal-clear materials are manifold:

  • Low wall thicknesses
  • High stability
  • Preservation of individual dental friction through 5-axis simultaneous machining

Occlusal splints are standard dental appliances that demand an individual, utmost perfect fit. DATRON dental technology is the suitable solution to this machining requirement.

Occlusal Splint (occlusal)

Temporary Dentures

DATRON technology offers the possibility of fully anatomical temporary dentures for all teeth and provides the following benefits:

  • Materials: PMMA, PEEK, POM
  • Short machining times
  • High surface quality
  • Deep fissures can be reproduced with DATRON micro-milling tools

Temporary dentures are used not only for aesthetic appeal, but also for functional reasons. Usually, these types of dentures allow a person to continue to eat and speak normally, which requires a perfect fit. DATRON milling technology supports your laboratory in achieving this goal.

Temporary dentures on implants (occlusal)
DATRON

Hybrid Production

3- and 5-axis milling machines for post-processing additively manufactured components

Digital Process Chain

Perfect Open Design for New Applications

DATRON machining technology is compatible with all leading CAD/CAM software packages while following an open system approach that allows for the integration of future systems. Thus, your investment today will prepare you for your advancement tomorrow and for years to come. In our technology centre, we continually test CAD/CAM components from the world‘s most prominent dental products manufacturers, and we‘re glad to share our know-how with you accordingly.

Consulting and Service

Our application technicians combine years of CAD/CAM dental expertise and technical know-how.

Dirk Iller

Please feel free to contact me at any time!

If you have any questions or would like to know more about our dental products, please do not hesitate to contact me.